ELECTRO-DYNAMIC VIBRATION SHAKER

DESCRIPTION:

Electrodynamic Vibration Shaker system are vibration generating equipment, having wide frequency range providing a worthwhile testing environment for sinusoidal, shock and random vibration analysis in Automotive parts and system qualification testing, Avionics and military hardware testing, satellite component testing, Product development & reliability, Telecom, Automobiles Industries, Stress screening and R&D laboratories etc. as per relevant ISO, IS, IEC, JSS 55555, MIL and other international Standards.

M/s Waseu Life Science Pvt. Ltd. make Electrodynamics Vibration shaker system has a platform tightly connected with a Drive Coil (moving element) placed in magnetic field excited by pure AC signal produced by Digital Power Amplifier. When AC current flows in the drive coil, a force are generated which moves drive coil and attached platform vertically. This vibratory force directly applied on the test specimens mounted on Shaker platform. This force also can be used in the horizontal direction with the help of a slip table attachment. M/s Waseu Life Science Pvt. Ltd. make Armature assembly utilize modern armature suspension systems which are rolling strut type featuring low transverse motion. Reinforced SS inserts are provided on Armature platform to hold specimen/object to be tested. The Digital Power Amplifier is a MOSFET based Modular type Class-D Switching to drive Electrodynamics Vibration shaker system with high reliability, excellent durability and direct coupling to shaker. The power amplifier has a user-friendly interface at the front panel and is equipped with self-diagnostic and protection features such as cooling check, current supply check, field supply check etc. to avoid damage to power Amplifier, shaker and testing object due to malfunctioning or mis-operation. The Digital Vibration controller is used to simulate actual field vibration conditions at test laboratory in a controlled manner so as to reproduce the same vibration atmosphere but ensuring safety of device/object under test. Sinusoidal, shock, random and complex sinus-random vibration environment can be simulated using different software methodologies on the any Standard Digital Vibration Controller providing sinusoidal sweep, shock and random vibration test.

FEATURES:

Accurate Control of Test Parameters	Aesthetically Designed
Reliable Performance	Easy to use
Corrosion Resistant interior and Exterior	Robust Construction
CFC Free operation	Easy Integration with Vibration Shaker Systems

VIBRATION TEST SYSTEMS AND RATING

TABLE - 1

SYSTEM MODEL	E600/P63	E500/P55	E400/P48	E350/P42	E300/P35
	SYSTEM PERFORMANCE PARAMETERS
Sine Force (peak in Kgf)	6000	5000	4000	3500	3000
Sine Force (KN)	60.0	50.0	40.0	35.0	30.0
Random Force (RMS Kgf)	6000	5000	4000	3500	3000
Random force (KN)	60.0	50.0	40.0	35.0	30.0
Shock Force (Kgf)	12000	10000	8000	7000	6000
Shock Force (KN)	120	100	80	70	30
Max. Acceleration(g)	85	90	85	100	85
Max. Velocity (m/s)	1.8	1.8	1.8	1.8	1.8
Max. Disp. (mm, p-p)	51/63	51/63	51/63	51/63	51/63
Frequency Range (Hz)	DC to 2000	DC to 2300	DC to 2400	DC to 2800	DC to 2800
Armature Resonance (±5%)	2000 Hz	2100 Hz	2100 Hz	2300 Hz	2300 Hz
	SHAKER PARAMETER
Model	EEV600	EEV500	EEV400	EEV350	EEV300
Mass of Armature	70Kg	55Kg	47Kg	35Kg	35Kg
Armature Diameter (in mm)	440mm	440mm	440mm	360mm	360mm
Payload Capacity (Kg)	600Kg	550Kg	500Kg	375Kg	375Kg
	Center-1	Center-1	Center-1	Center-1	Center-1

Insert pattern	Center-1	Center-1	Center-1	Center-1	Center-1
	200 PCD – 8	200 PCD – 8	200 PCD – 8	141.4 PCD -4	141.4 PCD -4
	400 PCD-8	400 PCD-8	400 PCD-8	200 PCD – 4	200 PCD – 4
				300 PCD-8	300 PCD-8
System power Consumption	90	80	64	55	48
Stray Magnetic Field	<1mT	<1mT	<1mT	<1mT	<1mT
(Above 150 mm from table)	(10 gauss)	(10 gauss)	(10 gauss)	(10 gauss)	(10 gauss)
Armature Centering	Auto/Manual	Auto/Manual	Auto/Manual	Auto/Manual	Auto/Manual
Utilities Required	4-6 Bar compressed Air, Earthing
	POWER AMPLIFIER
Model	EPA 63K	EPA 55K	EPA 48K	EPA 42K	EPA 35K
Max. Power Output (KVA)	63	55	48	42	35
Technology	PWM	PWM	PWM	PWM	PWM
Signal to Noise Ratio	>70db	>70db	>70db	>70db	>70db
Power Efficiency	>90%	>90%	>90%	>90%	>90%
Input Impedance	10Kohm	10Kohm	10Kohm	10Kohm	10Kohm
Input Sensitivity	4V rms , compatible with all standard controllers
Power Requirement	3 phase, 415 Volt /50 Hz + Neutral With Ground
Protection Interlock	Over Current, Over Voltage, Under Voltage, Module Failure, Cooling Interlock,
	Over Temperature Amplifier & Shaker, Current Limit, Loss of Input Phase etc.
	VIBRATION CONTROLLER
Standard Software	Swept Sine, Random, Classical Shock, Resonance Search Track and Dwell, Sine on Random

Optional Software	Random On Random, Shock Spectrum Response, Transient Time History, etc.
No. of Channels	4 Channels Upgradable up to 16 channels
	COOLING SYSTEM
Model	EECS012	EECS012	EECS011	EECS010	EECS010
Type of Cooling	Air Cooled	Air Cooled	Air Cooled	Air Cooled	Air Cooled

TABLE - 2

SYSTEM MODEL	E400/P40	E350/P35	E300/P32	E250/P18	E200/P09
	SYSTEM PERFORMANCE PARAMETERS
Sine Force (Kgf)	2500	2000	1500	1000	600
Sine Force (KN)	25.0	20.0	15.0	10.0	6.0
Random Force (RMS Kgf)	2500	2000	1500	1000	420
Random force (KN)	25.0	20.0	15.0	10.0	4.20
Shock Force (Kgf)	5000	4000	3000	2000	1200
Shock Force (KN)	50	40	30	20	12
Max. Acceleration(g)	100	80	115	76	80
Max. Velocity (m/s)	1.8	1.8	1.7	1.7	1.6
Max. Disp. (mm, p-p)	51	51	51	38	30
Frequency Range (Hz)	DC to 3000	DC to 3000	DC to 3200	DC to 3200	DC to 3500
Armature Resonance (±5%)	2500 Hz	2500 Hz	2600 Hz	2700 Hz	2900 Hz
	SHAKER PARAMETER
Model	EEV250	EEV200	EEV150	EEV100	EEV060
Mass of Armature	25Kg	25Kg	13Kg	13Kg	7.5 Kg

Armature Dia. ( in mm)	300	300	300	240	180
Payload Capacity (Kg)	350Kg	350Kg	300Kg	240Kg	130Kg
Insert pattern	Center-1	Center-1	Center-1	Center-1	Center-1
	141.4 PCD -4	141.4 PCD -4	100.4 PCD -4	100.4 PCD -4	100.4 PCD -4
	200 PCD – 4	200 PCD – 4	200 PCD – 4	141.4 PCD -4	141.4 PCD -4
	250 PCD-4	250 PCD-4	250 PCD-4	200 PCD-4
System power Consumption (KVA)	40	35	32	18	9.0
Stray Magnetic Field	<1 mT (10 gauss)	<1 mT (10 gauss)	<1.5mT (15 gauss)	<1.5mT (15 gauss)	<2.5 mT (25 gauss)
Armature Centering	Auto/Manual	Auto/Manual	Auto/Manual	Auto/Manual	Auto/Manual
Utilities Required	4-6 Bar compressed Air, Earthing
	POWER AMPLIFIER
Model	EPA 28K	EPA 24K	EPA 18K	EPA 10K	EPA 05K
Max. Power Output (KVA)	28	24	18	10	5
Technology	PWM	PWM	PWM	PWM	PWM
Signal to Noise Ratio	>70db	>70db	>70db	>70db	>70db
Power Efficiency	>90%	>90%	>90%	>90%	>90%
Input Impedance	10Kohm	10Kohm	10Kohm	10Kohm	10Kohm
Input Sensitivity	4V rms , compatible with all standard controllers
Power Requirement (3 phase, N and Gnd.)	3 phase, 415 Volt /50 Hz + Neutral With Ground
Protection Interlock	Over Current, Over Voltage, Under Voltage, Module Failure, Cooling Interlock,
	Over Temperature Amplifier & Shaker, Current Limit, Loss of Input Phase etc
	VIBRATION CONTROLLER
Standard Software	Swept Sine, Random, Classical Shock, Resonance Search Track and Dwell, Sine on Random

	Random On Random, Shock Spectrum Response, Transient Time History etc.
	4 Channels Upgradable up to 16 channels
	COOLING SYSTEM
Model	EECS010	EECS010	EECS09	EECS09	EECS06
Type of Cooling	Air Cooled	Air Cooled	Air Cooled	Air Cooled	Air Cooled

TABLE - 3

SYSTEM MODEL	E040/P4	E020/P2	E010/P1	E005/P05	E001/P01
	SYSTEM PERFORMANCE PARAMETERS
Sine Force (Kgf)	400	200	125	50	11
Sine Force (KN)	4.0	2.0	1.0	0.5	0.1
Random Force (RMS Kgf)	283	148	70	38	7.0
Random force (KN)	2.83	1.4	0.7	0.4	0.07
Shock Force (Kgf)	800	400	200	110	22
Shock Force (KN)	80	70	60	50	40
Max. Acceleration(g)	57	75	70	60	70
Max. Velocity (m/s)	1.6	1.4	1.2	1.2	1.2
Max. Disp. (mm, p-p)	30	20	18	12/15	6
Frequency Range (Hz)	DC to 3500	DC to 4000	DC to 4500	DC to 4500	DC to 4500
Armature Resonance (±5%)	3000 Hz	3500 Hz	4000 Hz	4000 Hz	4000 Hz
	SHAKER PARAMETER
Model	EEV040	EEV020	EEV010	EEV005	EEV001
Mass of Armature (kg)	7.0	2.6	1.8	0.8	0.4

Armature Dia. ( in mm)	180		140	125	100		25
Payload Capacity (Kg)	80		40	20	6.0		1.5
Insert pattern	Center-1		Center-1	Center-1	Center-1		Center-1
	100 PCD -4		70 PCD -4	50 PCD -4	35 PCD -4		15 PCD -4
	141.4 PCD -4		100PCD -4	100PCD- 4	70PCD- 4
System power Consumption (KVA)	4.5		3.0	2.0	1.0		0.5
Stray Magnetic Field	<2.5 mT (25 gauss)		<3 mT (30 gauss)	<3 mT (30 gauss)	<3 mT (30 gauss)		<3 mT (30 gauss)
Armature Centering	Auto/Manual		Auto/Manual	Auto/Manual	Auto/Manual		Auto/Manual
Utilities Required	4-6 Bar compressed Air, Earthing
	POWER AMPLIFIER
Model	EPA4K4		EPA2K2	EPA010	EPA005		EPA001
Max. Power Output (KVA)	4.0		2.0	1.0	0.5		0.1
Technology	PWM		PWM	PWM	PWM		PWM
Signal to Noise Ratio	>70db		>70db	>70db	>70db		>70db
Input Sensitivity	4 Vrms, compatible with all standard Vibration Controller
Input Impedance	10K ohm		10K ohm	10K ohm	10K ohm		10K ohm
Power Efficiency	> 90%	> 90%		> 90%	> 90%	> 90%
Power Requirement (3 phase, N and Gnd.)	3 phase, 415 Volt /50 Hz + Neutral With Ground				1 phase, 220 Volt/50 Hz +Neutral With Ground
Protection Interlock	Over Current, Over Voltage, Under Voltage, Module Failure, Cooling Interlock
	Over Temperature Amplifier & Shaker, Current Limit, Loss of Input Phase etc
	VIBRATION CONTROLLER
Standard Software	Swept Sine, Random, Classical Shock, Resonance Search Track and Dwell, Sine on Random
	Random On Random, Shock Spectrum Response , Transient Time History etc

	CC
	COOLING SYSTEM
Model	EECS06	EECS04	EECS02	EECS02	EECS01
Type of Cooling	Air Cooled	Air Cooled	Air Cooled	Air Cooled	Air Cooled

PAY LOAD SUPPORT FOR ATTACHMENT WITH SHAKERS

Combo Base Horizontal Slip Table

CB HST Model	Table Size (mm x mm)	Mass (Kg) Mg	Shaker Model
HST 0303	300 x 300	11	EEV 010 to 020
HST 0406	400 x 600	22	EEV 040 to 100
HST 0606	600 x 600	25	EEV 040 to 100
HST 0608	600 x 800	45	EEV 060 to 100
HST 0610	600 x 1000	65	EEV 130 to 200
HST 0810	800 x 1000	85	EEV 200 to 400
HST 1010	1000 x 1000	105	EEV 200 to 600

Vertical Load Support

CB HST Model	Size mm	Mass (Kg) Mg		Shaker Model
VLS 030	300	16	12	EEV 010 to 020
VLS 040	400	25	19	EEV 020 to 40
VLS 050	500	33	27	EEV 040 to 100
VLS 055	550	40	32	EEV 040 to 100
VLS 060	600	45	35	EEV 100 to 200

VLS 080	800	73	60	EEV 200 to 400
VLS 100	1000	110	91	EEV 200 to 600

Square Head Expander

CB HST Model	Size mm	Mass (Kg) AI Mg		Shaker Model
SHE 010	100×100	1.2	0.9	EEV 005
SHE 020	200×200	5	3.5	EEV 020
SHE 030	300×300	12.5	8	EEV 060
SHE 040	400×400	20	15	EEV 130
SHE 050	500×500	30	23	EEV 130
SHE 060	600×600	45	37	EEV 200
SHE 080	800×800	90	78	EEV 250
SHE 100	1000×1000	135	110	EEV 350

Circular Head Expander

CB HST Model	Size mm	Mass (Kg) AI Mg		Shaker Model
CHE 010	1.2	1.2	0.9	EEV 010 to 020
CHE 020	4.5	4.5	3.2	EEV 020 to 040
CHE 030	11.5	11.5	7.5	EEV 040 to 100
CHE 040	18	18	14	EEV 040 to 100
CHE 050	28	28	21	EEV 040 to 100
CHE 060	42	42	34	EEV 130 to 200
CHE 080	82	82	70	EEV 200 to 600
CHE 100	118	118	100	EEV 200 to 600

Give us a call +91 9319193510