Sampling Booth
WLS-SB326, WLS-SB336, WLS-SB436, WLS-SB446, WLS-SB646, WLS-SB666
Sampling Booth provides a safe, HEPA Filtered environment, for the dispensing of hazardousdrug powders. Air is pulled away from user thru rear-wall pre-filters, trappingpowders; recirculating air through ceiling mounted high efficiency particulate air (HEPA) filter rated 99.99% efficient at 0.3 microns.) protects the operators from toxic chemicals / raw materialsused for manufacturing of tablets, medicines, capsules etc. from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. The product also known as Pharmaceutical Sampling Booth.
About the product
Sampling Booth provides a safe, HEPA Filtered environment, for the dispensing of hazardousdrug powders. Air is pulled away from user thru rear-wall pre-filters, trappingpowders; recirculating air through ceiling mounted high efficiency particulate air (HEPA) filter rated 99.99% efficient at 0.3 microns.) protects the operators from toxic chemicals / raw materialsused for manufacturing of tablets, medicines, capsules etc. from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. The product also known as Pharmaceutical Sampling Booth.
Features & Benefits
- Designed in accordance with WHO-GMP.
- Dual stage Filtration like Prefilter, HEPA filter.
- Heavy duty Low noise motor blower assembly.
- Suitable to accommodate to floor & table top for keeping weight machine5. Negative pressure inside the booth prevents the escape of fine powder from thework area.
- Fully integrated system.
- Easy installation & economical.
- Stainless steel AISI 304 structures.
- Dynamic gasket to guarantee the perfect sealing of the filters.
- Down cross is equipped with EBM fans with AC frequency control.
- Corrosion resistant exterior and interior.
- Sturdy construction
Product Specifications
| Model No. | WLS-SB326 | WLS-SB336 | WLS-SB436 | WLS-SB446 | WLS-SB646 | WLS-SB666 |
| INNER SIZES (In Feet) | 3 x 2 x 6 | 3 x 3 x 6 | 4 x 3 x 6 | 4 x 4 x 6 | 6 x 4 x 6 | 6 x 6 x 6 |
| Direction of flow | Vertical | |||||
| Material of Construction | SS304 / SS316 or G I Powder Coated | |||||
| Cleanliness | Class 100 as per US FED STD 209E (IS 14644-1) | |||||
| Particle Retention | 0.3 micron | |||||
| Noise Level | 65dB | |||||
| Velocity | 0.3-0.6 m/s | |||||
| Illumination | Fluorescent tubes diffusers | |||||
| Light intensity | > 500 lux | |||||
| Filters | HEPA filters with a minimum efficiency of 99.99% at 0.3 micron. | |||||
| Curtains | vertically downward | |||||
| Pre filter | Washable type pleated pre filter with 90% Efficiency. | |||||
| Motor / Blower assembly | Direct drive continuous duty ¼ HP with sealed bearings. | |||||
| Power Supply | 230V Single Phase, 50 Hz | |||||
Principle:
The air forced downwards is extracted at low level into the booth’s filtration system where dust particles are contained at each level of filtration prior to being re- circulated back into the booths’ air stream. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from theoperators breathing zone.
Construction:
All Sampling Booths are available in the following materials of construction depending upon customer’s choice.
- G.I. with Powder Coated finish.
- Fully Stainless Steel with satin finish (SS 304 / SS 316) polycarbonate curtains
Book Your Equipment Demonstration
Experience the quality with our in-house demonstration facility.
